These are the first 10 steps used to prepare the martini glasses before applying the beach resin design.
Step 1
Go to your local dollar store and buy a 5-inch round soccer ball or basketball.
Step 2
Cut the ball in half.
Step 3
Make a hole through the center of one half of the ball using the turner hole.
Step 4
Cut four 1-inch square pieces of double-sided sticky tape.
Step 5
Place the four pieces of double-sided sticky tape evenly inside the ball half. Repeat with the other half of the ball.
Step 6
Press the tape firmly into place using your thumb and index finger.
Step 7
Place one half of the taped ball inside the martini glass, making sure the tape is facing the inside of the glass.
Step 8
Insert the turner hole through the center of the ball.
Step 9
Cut four 6-inch pieces of duct tape and place each strip across from the other, securing them from the center pole to the edge of the glass.
Step 10
Cut one additional 6-inch piece of duct tape and wrap it around the center pole to secure the other pieces of tape.
Add comment
Comments